Download Ebook K40 Whisperer units. Installing K40 Whisperer And Inkscape - LaserGods.com K40 Whisperer is an alternative to the the Laser Draw (LaserDRW) program that comes with the cheap Chinese laser cutters available on E-Bay and Amazon. K40 Whisperer reads SVG and DXF files, interprets the data and sends commands to. Add Tip Ask Question Comment Download. Step 1: Design the Molecule. I've used Inkscape for design and k40 whisperer for laser cutting, both are open source. The design was made keeping in mind that cutting will be done with whisperer, and thus specific colors and other nuances. See screenshots for more info and check the next step for more. Engraving Glasses With a K40 Laser: I've been wanting to get a rotary axis attachment for my K40 Laser Engraver for a long time now. It would allow me to engrave glasses which is something I have done using vinyl templates and sand blasting up until now. Download Inkscape LaserDRW Extension (Click Here) Download Inkscape Latest Version (Click Here) Download CorelLaser for CorelDraw (Click Here) Download K40 Whisperer User Manual (AI Version) (Click Here) Download K40 Whisperer User Manual (Inkscape Version) (Click Here) For RDWorks Version: Download RDWorks V8 Software (Click Here).

• K40 Whisperer Inkscape Not Found
• K40 Whisperer Software Download
• K40 Whisperer Wood Settings
• K40 Whisperer Settings
• K40 Whisperer Install

1. To install a new extension, download and unpack the archive file. Copy the files into the directory listed at Edit Preferences System: User extensions. After a restart of Inkscape, the new extension will be available. To learn about how to make one yourself, see here. Some extensions may depend on other programs, that will need to be installed on your computer for them to work correctly.
2. The stock boards that work with K40 Whisperer are not able to control the power output by the laser. However, grayscale can be simulated by creating a halftone image (dithering) of the raster image. Below is an example of an image that was engraved with the Halftone (Dither) option turned on in K40 Whisperer.

Related searches

• » k40 whisper download
• » k40 whisper version 12
• » k40 whisper software
• » download whisper k40
• » whisper k40 laser
• » smx-k40 intelli-studio обновить
• » k40 whisperer findeiberfet keine treiber
• » whisperer k40
• » whisperer k40 download
• » k40 whisperer download

k40 whisper

• More

  K40 Whisperer

• More

  VAIO Teal Whisper Wallpaper 1.0.0.10100

• More

  Escape Whisper Valley 1.0.0.67

• More

  ZX Messenger Whisper 源代码

• More

  Whisper of a Rose Gold

• More

  Escape Whisper Valley (solo rimozione)

  Escape Whisper Valley (solo rimozione) - Shareware -
• More

  Escape Whisper ValleyJust For Fun Games

  Escape Whisper ValleyJust For Fun Games - Shareware -
• More

  ZX Messenger Whisper

• More

  Escape Whisper Valley (nur deinstallation)

  Escape Whisper Valley (nur deinstallation) - Shareware -
• More

  Escape Whisper Valley (entfernen)

• More

  Whisper Instant Messenger 0.2.6

  Whisper IM is a secure IM client that providesend-to-end encryption over a XMPP/Jabber network.The encryption system (The Whisper Protocol) isdesigned for instant messaging, and is IM protocoland platform neutral. more info..
• More

  Tropic Island - Animated Screensaver 1.0

  'Tropic Island' is an Animated Screensaver by EleFun Multimedia devoted to the sea and the islands.The regular ship has come to an anchor in the small bay of the tropic island. more info..
• More

  Tropic Island - Animated Wallpaper 5.7

  'Tropic Island' is an Animated Wallpaper by EleFun Multimedia devoted to the sea and the islands.The regular ship has come to an anchor in the small bay of the tropic island. more info..
• More

  Seaside Café - Animated Screensaver

  “Seaside Café” is an Animated Screensaver by EleFun Multimedia devoted to the nature theme. In the resort city Manzanillo, Mexico, near the very seaside of the Pacific Ocean there is a café named “La Puesta Carinosa” which means “Tender … more info..
• More

  Seaside Café - Animated Wallpaper

  “Seaside Café” is an Animated Wallpaper by EleFun Multimedia devoted to the nature theme. In the resort city Manzanillo, Mexico, near the very seaside of the Pacific Ocean there is a café named “La Puesta Carinosa” which means “Tender … more info..
• More

  Maureen Lang - Whisper On The Wind

  This book was set in Brussels in the midst of WW1. Isa Lassone sneaks back to Brussles to rescue those closest to her and Edward Kirkland is the son of the lady who was more of a mother to Isa than her own mother. more info..
• More

  Tropic Island [AD] 5.7

  'Tropic Island' is an Animated Wallpaper by EleFun Multimedia devoted to the sea and the islands. The regular ship has come to an anchor in the small bay of the tropic island. more info..
• More

  Tropic Island 5.7

  'Tropic Island' is an Animated Screensaver by EleFun Multimedia devoted to the sea and the islands. The regular ship has come to an anchor in the small bay of the tropic island. more info..
• More

  inG8 for Android 1.2

  Recover deleted data from Android cell phones and tablets. inG8 for Android can recover deleted text messages, contacts, call logs, calendar entries, notes, MP3s, documents, photos, Chrome history, Facebook messages, Jott … more info..
• More

  inG8 for iOS 1.3

  Recover deleted data from iPhones, iPads, and iPod Touches. inG8 for iOS can recover deleted text messages, contacts, call logs, calendar entries, notes, Safari bookmarks, recently deleted photos, Chrome history, Gmail, Jott … more info..

• More

  K40 Whisperer

• More

  VAIO Teal Whisper Wallpaper 1.0.0.10100

• More

  Escape Whisper Valley 1.0.0.67

• More

  ZX Messenger Whisper 源代码

• More

  Whisper of a Rose Gold

Most recent searches

• » vixwin database finder
• » ethernet driver toshiba
• » descargar gamerclub
• » download riva tuner statistics
• » my summer car download 2019
• » iz-10 nicolet
• » ksystem ver5
• » fortinet client 6.2.6 uninstaller
• » free download camera for acer laptop
• » wemod.com download
• » download minecraft versi 3.2.0.3
• » zoom 5.4.6
• » 不二越 fd on desk
• » videoder leöltése
• » google chrome 87 dowland
• » epson connection printer checker
• » アーキトレンドゼロ ネットワーク認証ライセンスセンター
• » biovia license pack download
• » 自社作成変換 biz
• » hp dropbox plugin 36

Overview

You’ll be disconnecting connectors from your K40’s existing controller, and reconnecting them to the Mini Gerbil. It’s a great idea to read all the instructions below before starting. Basic familiarity with connectors/electronics is helpful, but the forum is a great place to ask questions if you’re unsure about anything. Typically takes 10-20 minutes.

First, be aware there are many K40 versions, with various combinations of:

• Control panel – Digital and Analogue versions (panel or potmeter knob)
• Connector lead – ribbon cable version (X axis motor plus the limit switches) and non-ribbon version – individually wired x/y axis and limit switches (more info is provided in the forum, see click to thread on k40 forum page)
• Power supply type (PSU) – All screw Terminals, Micro plugs for LP(2pins),WP(2pins),PWM(3pins)
• Limit switches – mechanical limit switches (two leads: signal and ground), and electronic limit switches (signal, ground and 5 Volt power)

So don’t worry if your K40 appears different to the diagrams below, just work through carefully to select the closest match.

For initial setup, we very strongly recommend using the standard homing position (back, left hand side) of your K40. For more details and alternatives, see https://awesome.tech/limit-switches-and-homing/

Tools and materials:

• Small screw driver
• Small nose pliers

Steps

Just cause 2 serial key. Let’s start with mounting your Mini Gerbil onto the supplied mounting board – see https://awesome.tech/new-mini-gerbil-mounting-solution/

STEP 1 Turn your K40 power off at the wall (powerpoint).

Orientation

STEP 2 Open up the main panel on the right hand side of your K40. Inside you’ll see an electronics enclosure which is the K40 power supply:

The first two images show PSU type 1, the last image shows PSU type 2.

The leftmost connector in the above diagram is the mainsInpixio photo editor serial key. voltage power connector – no need to touch this. The Gerbil installation only uses the leads associated with the centre and rightmost connectors.

STEP 3 Follow the the wires from the front of the power supply to the circuit board on the back of the K40’s front panel, and you’ve found the K40’s old controller, which looks like this:

(photo courtesy of: www.igorkromin.net)

STEP 4 Temporarily attach a label to any similarly coloured wires on the old controller so you can identify them later on if necessary

STEP 5 Take a close up photo of the wires coming into the old controller (like the above photo), ensuring you can clearly see which wires and labels attach to the various connectors.

STEP 6 Now take a look at the Mini Gerbil. It has headers with a lock mechanism to help you avoid plugging connectors in the wrong way around.

Disconnecting the old controller and connecting the Mini Gerbil

K40 Whisperer Inkscape Not Found

STEP 7 Unplug the small 4 wire Y axis motor connector from the old controller and plug into the Mini Gerbil headers, as shown in the picture below. The header lock mechanism prevents incorrect orientation. Note: if the machine does “home” away from zero during testing then you need to turn the connector 90 degrees or configure the firmware to revert the Y direction (via command $23=1 to reverse Y and keep X direction, $23=2 to reverse X and keep Y or reverse both axis via $23=0)

STEP 8 Unplug the large 4 wire Low Voltage connector from the old controller, and plug into the large header on the Mini Gerbil labelled J3 ‘Lo/5V/Gnd/24V’. The header lock mechanism prevents incorrect orientation.

The photo above shows labels on the Mini Gerbil to aid orientation of the large low voltage power connector. (In some older versions of the K40, the connector has 6 positions with 4 wires. You can extract carefully the metal connector inserts and re-seat them in the right positions/sequence in the 6 pin socket connector and slide the 6 pin connector over the 4 male pins. Alternatively you can buy a standard 4 pin (MTA-156 – 4 Position 3.96 mm pitch) PC connector and use this to connect the Gerbil controller to the Laser power supply. See Digikey MTA connectors)

For K40 owners with a ribbon cable see step 9a. For K40 owners without a ribbon cable, see step 9b.

STEP 9a Unplug the ribbon cable from the old controller, and plug into the long thin slot in the Mini Gerbil. The metal lips of the ribbon cable must face the edge of the Gerbil, as shown below. If your version hasn’t got a ribbon cable then read : awesome.tech/k40-forum/?view=thread&id=31 . This post provides details and photographs.

STEP 9b: If your K40 has a plug for limit switches instead of a ribbon cable then you’ll need to connect it to the Mini Gerbil’s connector behind the ribbon connector. First, before disconnecting anything, review the wiring of the limit switch plug on the existing control board. The photo below shows the location – note carefully the labels on the NanoM2 board Y, X, GND (and 5V if applicable).

Now, look at the secondary connector behind the ribbon cable socket. Facing from the edge of the Mini Gerbil PCB V1.1A and looking towards the ribbon connector, the pins are GND, Y-Limit, X-Limit, GND and 5V. You only need the 5V supply if you have electronic (opto) limit switches. Note the ribbon and limit switch connectors are swapped around (pin header on the edge) on the Mini Gerbil 2.0 PCB for ease of connecting.

Install the limit switch plug from the old controller into the Mini Gerbil, carefully checking the wires are matched.

STEP 10: The strength of the laser beam is controlled by a ‘PWM’ wire. The existing PWM wire needs to be disconnected from the terminal strip and be replaced with the provided wire. To cover both K40 PSU options, we’ve provided one with Female/Male Dupont connectors as well as one with Female/Female connectors.

If you’re unsure which is your K40’s PWM wire, it comes from the middle of the current control potentiometer or digital control panel to the IN terminal shown on the power supply diagrams above.

Connect the supplied wire from the Mini Gerbil’s PWM output to the PWM input of the power supply as depicted above (labelled ‘IN’ terminal). The old current control wire can be left disconnected, and it’s recommended you wrap the end in electrical tape to avoid it potentially connecting with anything else.

K40 Whisperer Software Download

STEP 11 Confirm your Y axis, Low Voltage and Ribbon connectors are now plugged into the Gerbil like this:

STEP 12 Disconnect the existing K40 USB lead from the old controller and plug into the Mini Gerbil. Plug the other end into your PC/MAC as usual.

Questions ? Please check our forum and refer to the instruction numbers above if posting a question

Software

Lightburn – strongly recommended

Let’s now setup your computer software for the Mini Gerbil. We strongly recommend Lightburn, see https://awesome.tech/download/lightburn-and-laserweb-instructions/

Inkscape

If you have a particular reason to use Inkscape, you’ll need to check:

Various G-code senders

If you’re a G-code afficianado, you can use any G-code sender with Mini Gerbil. CNCjs and UGS are examples of compatible g-code senders but any others should work too. The default behavior of Mini Gerbil when powered up is to energise the motors in hold position (lock up). If your K40 uses a Door switch, you’ll need to clear the controller alarm via a command “$X”. The Inkscape plugins do that clear command by default when streaming the g-code files. After issuing a “$X” you can issue a g-code command like “G0 X1 Y1” t’o move the gantry or issue a “$H” to home the machine to its zero coordinates (Left Top corner same a stock K40). Command “S100” turns the laser on where the number stands for the power e.g. 100 equals 1mA. (Depending how you set the power range e.g. default $30=1000 equals 20mA so S100=2mA. You can experiment with this setting to get the best laser results). The following table shows G-code commands and their meanings

G0 is a move without any tools enabled.

You can also home the machine via the $H command. If the machine does not home correctly then it can be that the axis motor connector needs to be swapped around (180 degrees, when homing away from zero or use the $23 settings to reverse the direction) or the end stops are not properly connected or engaging.

Limit code testing via G-code

You can test the limit switches via CNCJS. The status command “?” (yes, just type a question mark in the black box area called console in the G-code sender) provides status information back so you can see if they work when you push the gantry in the zero position. (Top left corner, set $1=100 so motors don’t lock while in rest. Later on revert back to 255 to keep the Gantry aligned and into the correct position). Some of the status line information might be hidden so expand the status message box. The limit switch information is at the end of the status line. If the limit switch is not triggered then there is no information. If triggered then you see something like <Idle MPOS:0.000,0.000 Bf:0,255 Fs:0,0 Pn:X,Y>

K40 Whisperer Wood Settings

Mirror Alignment via G-code

K40 Whisperer Settings

It’s handy to have short pulses of laser power when aligning mirrors. To do so with G-code, set Mini Gerbil in ‘CNC’ mode via ‘$32=0’, than you can switch-on the laser at rest via the G-code commands: ‘M3’/’M4’ and off via ‘M5’. Use the ‘Sxxx’ command to set the output power e.g ‘S200’ for 2mA output. Don’t forget to set ‘$32’ back to ‘1’ (Laser mode) for safety reasons (in laser mode the laser can only burn when the gantry is in motion). The P is for pause 1 sec (you can change the value ).

• $32=0
• M4 S200
• M5
• P1000
• $32=1

K40 Whisperer Install

For all commands see Configuring Mini Gerbil wiki